DIRTY WATER

Method:

1.Use a 250mL beaker get 200mL of water

2.Add 2 spoonfuls of dirt

3.Add 10mL of oil

4.Add a spoonful of pebbles

5.Stir it for 2mins

6.Label a piece of paper with your names and place and place it under your beaker

7.Take a photo of your experiment

 AIM:TO MAKE THE DIRTY WATER INTO DRINKING WATER

DAY 1:TO SET UP FILTRATION DEVICE

Method:

1.We stirred it for a minute

2.we took out our dirty water and tip it in to a measuring beaker 

3.then we added 100 mL into the dirty water 

AIM:to make the dirty water in to clear water 

Method:

1.we got dirt ffrom the gardens and into clear water and peebles 

2.we had measure 100ML of dirty water and throw out the leftover and mix and add clean water and repeat it.

3.we put a cloth on top and a filtering paper and we had to tip the dirty water into the cloth then it went to the filter and then the filter picked up the dirt and same as the cloth.

We added dirt that was a solute into water which is a solvent and we later on diluted the dirty water and we filterated it by using a metal poll into a metal flat thing and we put the pole into the flat metal thing and then we added the funnel holders to the pole ten we put the funnels into the funnel holder then we put a cloth on the top one and a filter on the bottom one and we poured our dirty water into the cloth which went down to the filter then into the beaker which made the water clean.

conclusion:Did it work?yes      Would you do anything diffrent?for me i would try another way to do this project to make it easier.

CLEAN  :

DIRTY: